REVERSE OSMOSIS WATER TREATMENT
Reverse osmosis is highly effective at removing a wide range of contaminants, including dissolved salts, minerals, heavy metals, organic molecules, bacteria, and viruses. The efficiency of the process depends on the quality of the membrane, the pressure applied, the temperature of the incoming water supply and the nature of the impurities present in the source water.
COMMERCIAL AND INDUSTRIAL REVERSE OSMOSIS WATER TREATMENT APPLICATIONS
Reverse osmosis (RO) is a water purification process that uses a semipermeable membrane to remove ions, molecules, and larger particles from water. It's a highly effective method for desalination, water purification, and the removal of various contaminants. The following is an ovoverview of how reverse osmosis works and some common applications:
SEMIPERMIABLE MEMBRANE
At the heart of the reverse osmosis process is a semipermeable membrane. This membrane has extremely small pores that allow water molecules to pass through while blocking larger molecules, ions, and impurities.
​
PRESSURE APPLICATION
To initiate the reverse osmosis process, water is subjected to pressure on one side of the membrane. This pressure is higher than the osmotic pressure of the solution being treated. Osmotic pressure is the natural force that causes water molecules to move from a region of lower solute concentration to a region of higher solute concentration through a semipermeable membrane.
​
SEPARATION OF SOLUTES
As water is pushed through the semipermeable membrane, most dissolved salts, ions, molecules, and larger particles are unable to pass through the small pores of the membrane. These impurities are left behind on the side of the membrane where the pressure was applied. Meanwhile, purified water (permeate) flows through the membrane, leaving contaminants behind.
​
CONCENTRATION OF REJECTED SOLUTES
The rejected solutes, also known as the concentrate or brine, accumulate on the side of the membrane where pressure was applied. This side of the membrane becomes more concentrated with impurities, and the rejected water is usually discharged.
​
PURIFIED WATER COLLECTION
On the other side of the membrane, purified water, or permeate, collects. This water has had the majority of its impurities removed, resulting in clean and fresh water for your process or application needs.
WATER RECOVERY EFFICIENCY OF REVERSE OSMOSIS
​
The water recovery efficiency of a reverse osmosis (RO) system refers to the percentage of incoming feed water that is converted into purified water (permeate), as opposed to being discharged as waste (concentrate or brine). RO systems are not 100% efficient in terms of water recovery due to the nature of the process and the need to maintain effective filtration. In fact, many RO membranes from the past 10 years may put as many as three or four gallons of water down the drain for every gallon of usable water supplied.
​
The water recovery efficiency of an RO system can vary based on factors such as system design, operating conditions, membrane quality, and the specific contaminants present in the feed water. Generally, RO systems can achieve water recovery rates ranging from 25% to 50%, but typical recovery rates for household and commercial systems fall in the range of 25% to 33%.
WHY RO SYSTEMS CANNOT ACHIEVE 100% WATER RECOVERY
Concentration of Impurities
As water is pushed through the RO membrane, impurities are left behind in the concentrate stream. The concentration of these impurities gradually increases in the concentrate, making it more difficult for the membrane to effectively remove additional contaminants. Therefore, a certain amount of concentrate must be continuously flushed away to prevent fouling of the membrane.
​
Minimizing Fouling
To prevent the accumulation of impurities on the membrane's surface and maintain its efficiency, a flow of water (the concentrate) is used to wash away these impurities. This is necessary to ensure that the membrane can continue to effectively filter the feed water. If recovery rates are pushed too high, the membrane could become clogged or fouled more quickly, leading to decreased performance and the need for more frequent cleaning or replacement of the membrane.
​
Balancing Efficiency and Water Waste
Achieving a higher water recovery rate means producing more clean water while minimizing the amount of waste water. However, increasing recovery rates can lead to decreased system efficiency and more frequent maintenance. Striking a balance between high water recovery and maintaining effective filtration is essential to ensure that the RO system functions optimally over time.
EFFICIENCY OF REVERSE OSMOSIS SYSTEMS
​
Ultimately, the water recovery efficiency of an RO system is a design and operational consideration that depends on factors like the type of application, feed water quality, and the desired balance between water savings and system effectiveness.
​
It's important to note that while higher water recovery rates can be beneficial for conserving water, they may come at the cost of reduced membrane lifespan and increased energy consumption due to the higher pressures required to achieve those rates. Therefore, manufacturers and operators often aim for recovery rates that provide a good balance between water conservation and system performance.
​
Reverse osmosis is highly effective at removing a wide range of contaminants, including dissolved salts, minerals, heavy metals, organic molecules, bacteria, and viruses. The efficiency of the process depends on the quality of the membrane, the pressure applied, the temperature of the incoming water supply and the nature of the impurities present in the source water.
REVERSE OSMOSIS APPLICATIONS
​
Reverse osmosis systems are commonly used for various applications, including:
-
Desalination of seawater to produce fresh drinking water.
-
Household water purification to remove contaminants like fluoride, chlorine, and minerals.
-
Industrial processes that require high-purity water, such as medical test and equipment manufacturing and other pharmaceutical water.
-
Wastewater treatment to remove pollutants and make water suitable for reuse.
While reverse osmosis is effective in producing clean water, it's worth noting that the process can be relatively slow and may result in some water wastage due to the creation of concentrate. Additionally, RO systems may not remove all types of contaminants, so supplementary treatments might be needed in certain cases.
To locate an authorized service dealer, or order replenishment cartridges, please contact us today via our website or call 866.551.0510